S&S Home Inspections - What is Inspected S&S Home Inspections - What is Inspected

Back to S&S Home Page

SECTIONS

1. Foundations, Basements, and Under-floor Areas
2. Exteriors
3. Roof Coverings
4. Attic Areas and Roof Framing
5. Plumbing
6. Electrical Systems
7. Heating Systems
8. Central Cooling Systems
9. Fireplaces and Chimneys
10. Building Interior
11. Other Built-in Appliances and Systems
12. Pools and Spas

SECTION 1 - Foundations, Basements, and Under-floor Areas
top

1. Foundation and other support components.
2. Under-floor ventilation.
3. Location of under-floor access opening(s).
4. Wood separation from soil.
5. Presence of drainage systems or sump pumps within foundation footprint.
6. Presence or absence of seismic anchoring and bracing components.
 
SECTION 2 - Exteriors
top
1. Surface grade, hardscaping and drainage within six feet of the inspected building or associated primary parking structure.
2. Wall cladding, veneers, flashing, trim, eaves, soffits and fascias.
3. Exterior portions of a representative sampling of doors and windows.
4. Attached decks, porches, balconies, stairs, columns, walkways, guard-rails and handrails.
 
SECTION 3 - Roof Coverings
top
1. Roof coverings.
2. Flashing, vents, skylights and other penetrations.
3. Roof drainage systems.
SECTION 4 - Attic Areas and Roof Framing
top
1. Framing and sheathing.
2. Access opening(s) and accessibility.
3. Insulation material(s).
4. Ventilation.
 
SECTION 5 - Plumbing
top
1. Supply, waste, and vent piping.
2. Fixtures, faucets and drains.
3. Water heating equipment, including combustion air, venting, connections, energy sources, seismic bracing, and temperature-pressure relief valves.
4. Functional flow of water supply and functional drainage at fixtures.
5. Gas piping and connectors.
6. Cross-connections.
 
SECTION 6 - Electrical Systems
top
1. Service conductors, equipment, and capacity.
2. Panels and overcurrent protection devices.
3. Service and equipment grounding.
4. Wiring types and methods.
5. A representative sampling of switches, receptacles, and light fixtures.
6. Ground-fault circuit-interrupters.
 
 
SECTION 7 - Heating Systems
top
1. Heating equipment and operation using normal user controls.
2. Venting systems.
3. Combustion and ventilating air.
4. Energy source and connections.
5. Heating distribution system(s) including a representative sampling of ducting, duct insulation, outlets, radiators, piping systems and valves.
 
SECTION 8 - Central Cooling Systems
top
1. Cooling equipment and operation using normal user controls.
2. Cooling distribution system(s) including a representative sampling of ducting, duct insulation, outlets, piping systems and valves.
3. Energy source and connections.
4. Condensate drains
.
 
SECTION 9 - Fireplaces and Chimneys
top
1. Chimneys, flues, dampers and associated components.
2. Fireboxes, hearth extensions and permanently installed accessory components.
3. Manufactured solid-fuel or gas-burning appliances.
 
SECTION 10 - Building Interior
top
1. Walls, ceilings and floors.
2. Security bars, ventilation components, and a representative sampling of doors and windows.
3. Stairs, handrails, and guardrails.
4. Permanently installed cabinet and countertop surfaces.
5. Safety glazing in locations subject to human impact.
 
SECTION 11 (OPTIONAL) - Other Built-In Appliances and Systems
top
 
Attic power vents, central vacuum, cook-tops and exhaust fans, dishwashers, food waste disposers, garage door openers, hydrotherapy tubs, ovens, microwave ovens, refrigerators
, freezers, trash compactors, or whole-house fans.
1. Optional systems, components and appliances specifically examined during the inspection.
2. Basic operation of optional systems, components and appliances specifically included in the inspection.
 
SECTION 12 (OPTIONAL) - Pools and Spas
top
The inspector may examine the following at his/her discretion, as agreed with client:
 
1. Location and type of pool or spa examined.
2. Conditions limiting or otherwise inhibiting inspection.
3. Enclosure and related gates.
4. Hardscaping and drainage related to the inspected pool or spa.
5. Condition of visible portions of systems, structures, or components.
6. Normally necessary and present equipment such as: lights, pumps, heaters, filters, and related mechanical and electrical connections.